CE Approved Pet Preform Injection Molding Machine 228t Hi-P228

Model NO.: HI-P228 Structure: Horizontal Plasticizing Way: Screw Type Automation: Automatic Certification: CE, ISO9001:2008 Screw Dia.: 60mm Shot Weight: 826g Trademark: HISSON Specification: ISO9001:2000, CE HS Code: 8477101090 Type: Injection Blow Molding Plastic Type: Thermoplastic Clamping Way: Hydraulic & Mechanical Computerized: Computerized Clamping Force: 2280kn Screw L/D: 25:1 Tie Bar Distance: 510*510mm Transport Package: Nude packing Origin: Zhejiang, China (Mainland) Servo motor system:
PLC: Taiwan TECHMATION controller         Driver: Taiwan Delta
Oil pump: Japan Sumitomo                        Servo motor: Italy PHASE.

AutomaticPET Preform Injection Molding Machine
Quick Detail:
HI-SVP228 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 228tons, real shot weight 800g.

Machine main components adopt world famous brand, e.g.:
Controller:TECHMATION (TAIWAN),
Low voltage contactor: SCHNEIDER(FRANCE),
Low voltage air switch: SCHNEIDER(FRANCE),
Proportional Valve: Dofluid HNC(TAIWAN)
Oil pump: VICKERS(USA)
Directional Valve: VICKERS(USA)
Induction travel switch: OMORON (JAPAN)
Inductor potentiometer: FORT(USA)

Description:

HI-SVP28 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 15g-500g, neck size 15mm to 120mm.

HI-SVP228 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages..

Applications:


Available mold cavities on HI-SVP228 PET Preform Injection Molding Machine:
For PET perform 15g-20g, 15mm-20mm, mold cavity can be: 8-Cavities, 12-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,
For PET perform 16g-48g, 28mm PCO, 25mm/30mm, mold cavity can be: 8-Cavities, 16-Cavities, 24-Cavities, 32-Cavities,
For PET perform 50g-500g, 60mm-120mm, mold cavity can be: 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities, 12-Cavities,


Specifications:
HI-P228 Technical Parameters

HI-P228			Parameters (Special design for PET)
TECHNICAL PARAMETER TABLE		Unit
INJECTION UNIT	SCREW DIAMETER	mm	60
	SCREW L/D RATIO	L/D	25
	SHOT VOLUME(THEORETICAL)	cm3	780
	INJECTION WEIGHT(PET)	g	826
	INJECTION PRESSURE	Mpa	147
	INJECTION RATE	g/s	273
	PLASTICIZING CAPACITY	g/s	49
	SCREW SPEED	rpm	0-180
CLAMPING UNIT	CLAMP FORCE	Kn	2280
	OPEN STROKE	mm	480
	MAX.MOULD HEIGHT	mm	550
	MIN.MOULD HEIGHT	mm	200
	SPACE BETWEEN TIE BARS	mm	510×510 (W×H)
	EJECTOR FORCE	Kn	65
	EJECTOR STROKE	mm	140
GENEREL	EJECTOR NUMBER	n	9
	PUMP PRESSURE	Mpa	16
	PUMP MOTOR POWER	KW	22
	HEATING POWER	KW	16.5
	MACHINE DIMENSION	m	6.0×1.4×2.2(L×W×H)
	MACHINE WEIGHT	T	6.9
	Hopper Capacity	L	50
	Oil Tank Capacity	L	320

Competitive Advantage:

1. This machine adopt special PET screw, prolonged screw and barrel will ensure PET plasticizing effect, to make performs with good brightness and transparence, the production is with low defect.
2. Increased oil pump's power
3. Increased heating ring's power
4. Heaters adopt ceramic, the using life is double than stainless steel.
5. Machine with oil filter system to ensure hydraulic oil clean , to prolong action valves using life.
6. The machine equipped with 7 inch colorful screen controller, brand Techmation from Taiwan, the controller is with several languages include English, French, Spanish, Portuguese, Russian, Arabic etc.
7. The machine equipped with hydraulic protection
8. The machine equipped with double Hydraulic pulling device
9. The machine equipped with double Air Ejector
10. The machine equipped with single slots on the mold plates,


Special designed points for PET(for HI-P series injection molding machine)

Characteristics of PET resin

1. melting point: 250-260, molding temperature scope of PET is from 255-290, improved GF-PET can reach 290-315.
2. Low viscosity degree.
3. Strong moisture absorbing ability.

Our machine's special design for PET

L/D:25, this is the standard parameter of our PET series injection molding machine.
Enlarged screw diameter and length.
Increased oil pump's power.
Increased heating ring's power.

Contact us if you need more details on Injection Molding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Preform Injection Molding Machine、Preform Injection Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : PET Preform Injection Molding Machine